| Barium titanate | |
|---|---|
| Identifiers | |
| CAS number | 12047-27-7 |
| ChemSpider | 10605734 |
| Jmol-3D images | Image 1 |
|
|
|
|
| Properties | |
| Molecular formula | BaTiO3 |
| Molar mass | 233.192 g/mol |
| Appearance | white crystals |
| Density | 6.02 g/cm3, solid |
| Melting point |
1625 °C |
| Solubility in water | insoluble |
| Solubility | slightly soluble in dilute mineral acids; dissolves in concentrated sulfuric acid and hydrofluoric acid |
| Band gap | 3.2 eV (300 K, single crystal)[1] |
| Structure | |
| Crystal structure | Tetragonal, tP5 |
| Space group | P4mm, No. 99 |
| Hazards | |
| R-phrases | R20/22 |
| S-phrases | S28A, S37, and S45 |
| (verify) (what is: /?) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
|
| Infobox references | |
Barium titanate is the inorganic compound with the chemical formula BaTiO3. Barium titanate is a white powder and transparent as larger crystals. This titanate is a ferroelectric ceramic material, with a photorefractive effect and piezoelectric properties.
Contents |
The solid can exist in five phases, listing from high temperature to low temperature: hexagonal, cubic, tetragonal, orthorhombic, and rhombohedral crystal structure. All of the phases exhibit the ferroelectric effect except the cubic phase. The high temperature cubic phase is easiest to describe, consisting of octahedral TiO6 centres that define a cube with Ti vertices and Ti-O-Ti edges. In the cubic phase, Ba2+ is located at the center of the cube, with a nominal coordination number of 12. Lower symmetry phases are stabilized at lower temperatures, associated with the movement of the Ba2+ to off-center position. The remarkable properties of this material arise from the cooperative behavior of the Ba2+ centres.
Barium titanate can be manufactured by heating barium carbonate and titanium dioxide. The reaction proceeds via liquid phase sintering. Single crystals can be grown around 1100 °C from molten potassium fluoride.[2] Other materials are often added for doping, e.g. to give solid solutions with strontium titanate. Reacts with nitrogen trichloride and produces a greenish or grey mixture, the ferroelectric properties of the mixture are still present in this form.
Much work has been dedicated to its morphology. Fully dense nanocrystalline barium titanate has 40% higher permittivity than the same material prepared in classic ways.[3] The addition of inclusions of barium titanate to tin has been shown to produce a bulk material with a higher viscoelastic stiffness than that of diamonds. Barium titanate goes through two phase transitions that change the crystal shape and volume. This phase change leads to composites where the barium titanates have a negative bulk modulus (Young's modulus), meaning that when a force acts on the inclusions, there is displacement in the opposite direction, further stiffening the composite.[4]
Like many oxides, barium titanate is insoluble in water but attacked by sulfuric acid. Its bulk room-temperature bandgap is 3.2 eV, but it increases to ~3.5 eV when the particle size is reduced from about 15 to 7 nm.[1]
Barium titanate is a dielectric ceramic used for capacitors. It is a piezoelectric material for microphones and other transducers. The spontaneous polarization of barium titanate is about 0.15 C/m2 at room temperature and its Curie point is 120 °C.[5] As a piezoelectric material, it was largely replaced by lead zirconate titanate, also known as PZT. Polycrystalline barium titanate displays positive temperature coefficient, making it a useful material for thermistors and self-regulating electric heating systems.
Barium titanate crystals find use in nonlinear optics. The material has high beam-coupling gain, and can be operated at visible and near-infrared wavelengths. It has the highest reflectivity of the materials used for self-pumped phase conjugation (SPPC) applications. It can be used for continuous-wave four-wave mixing with milliwatt-range optical power. For photorefractive applications, barium titanate can be doped by various other elements, e.g. iron.[6]
Thin films of barium titanate display electrooptic modulation to frequencies over 40 GHz.[7]
The pyroelectric and ferroelectric properties of barium titanate are used in some types of uncooled sensors for thermal cameras.
High purity barium titanate powder is reported to be a key component of new barium titanate capacitor energy storage systems for use in electric vehicles.[8]
Barioperovskite is a very rare natural analogue of BaTiO3, found as microinclusions in benitoite.
|
|||||
Titanium sulfate